Dry vacuuming

Removing dry, loose dirt from floor coverings and surfaces using the dry vacuum cleaner. Suitable for textile and textured floor coverings and surfaces.

01

Preparatory work

  • Select suitable products to match the surface to be cleaned (type / square metres) and the type of soiling.

  • Check, equip and ready the vacuum cleaner and all accessories in compliance with the instructions for use.

  • Pick up and dispose of coarse dirt (e.g. strings, bottles, etc.) by hand.

  • Put up the warning sign.

02

Main task

  • Use the dry vacuum cleaner to dry-vacuum the area in slightly overlapping passes; start from the wall socket and work your way across the room.


  • Perform a visual check.

03

Final steps

  • Clean the suction nozzle.

  • Check the power cable for visible damage, clean the cable and roll it up loosely towards the plug.

  • Remove the warning sign.

  • Check the fill level of the filter bag; change the bag if it is full.

  • Dispose of any waste.

  • Clean the cleaning equipment and replace as needed.

04

Comments

  • Wear the personal protective equipment (PPE) required by company regulations, safety data sheets and / or instructions for use.

  • Always check in advance which product meets your requirements (see Wetrok Cleaning & Care Instructions).

  • Wetrok AG accepts no liability for damage caused by improper use or incorrect product selection.

Download method as PDF

Weitere Methoden

To the method overview

Dust-binding dusting (disposables)

Dust-binding dusting Reusable

Feucht abwischen mit Schaum (manuelles Schäumen)

To the method overview