Window cleaning - Entire glass area with frame

Removing loose and stubborn dirt from the entire surface using the wetting tool with cover and the window cleaner (rubber lip). Suitable for glass surfaces (windows and glazing) and frames.

01

Preparatory work

  • Select suitable products to match the surface to be cleaned (type / square metres) and the type of soiling.

  • Put up the warning sign and take all necessary safety precautions.

  • Check the rubber lip of the window cleaner and replace as needed.

  • Fill the window cleaning bucket with cleaning product in accordance with the dosing instructions.

  • Cover vulnerable surfaces and the floor covering.

  • As needed: Remove cobwebs and loose dirt.

  • Dry scrub the rabbets and grooves of the frame with the joint brush and then use the dry vacuum cleaner to remove the dirt.

02

Main task

  • Use a wet cloth the wipe the frame, working from the bottom up. Use the white pad to loosen highly stubborn soiling on the wet frame.

  • Wipe down the frame with the thoroughly wrung-out cloth, working from the top down.

  • Moisten the wetting tool with cover. Wash the glass area of the window in a circular motion, working from the bottom up. Use the white pad or the window scraper with blade (blading) to loosen stubborn dirt as needed.

  • Dry a finger's width of the upper and left edge of the glass using the absorbent cloth.

  • Wipe down the glass surface with the window cleaner (rubber lip) horizontally or vertically in overlapping passes, working your way from the top down. Start at the top left. Dry the rubber lip on the cloth before starting each pass.

  • Use the cloth or the wetting tool to remove the dissolved dirt and the remaining cleaning product on the bottom frame.

  • Dry the remaining glass edges and the frame. As needed: Dry the window sill and the floor covering.

  • As needed: Polish the glass with a clean cloth to remove any stripes.

  • Perform a visual check.

03

Final steps

  • Remove the covering material.

  • Remove the warning sign. As needed: Remove the safety precautions.

  • Wash the used cloths and the cover in the washing machine.

  • Dispose of any waste.

  • Clean the cleaning equipment and replace as needed.

04

Comments

  • Wear the personal protective equipment (PPE) required by company regulations, safety data sheets and / or instructions for use.

  • Always check in advance which product meets your requirements (see Wetrok Cleaning & Care Instructions).

  • Wetrok AG accepts no liability for damage caused by improper use or incorrect product selection.

Download method as PDF

Weitere Methoden

To the method overview

Dust-binding dusting (disposables)

Dust-binding dusting Reusable

Feucht abwischen mit Schaum (manuelles Schäumen)

To the method overview